Hollow Shaft Motor Frame Size Guide for Different High Pressure Cleaning Equipment Designs

November 17, 2026
آخر أخبار الشركة Hollow Shaft Motor Frame Size Guide for Different High Pressure Cleaning Equipment Designs
1. Why Does Motor Frame Size Matter in Pressure Cleaning Equipment?

When designing high-pressure cleaning equipment, selecting a motor involves more than matching rated power and speed. The motor must also fit the available installation space and the pump connection structure. Frame size, flange dimensions, and mounting measurements all influence motor-pump integration.

For pressure washer manufacturers and pump equipment OEMs, selecting a suitable Hollow Shaft Electric Motor requires consideration of both electrical specifications and mechanical interfaces.

The HS Series is an asynchronous hollow shaft motor designed for direct coupling with high-pressure pumps. It is intended for pressure cleaners and washing plants. Its direct coupling arrangement helps reduce overall machine dimensions, while multiple frame and flange configurations provide options for different equipment layouts.

2. What Frame Sizes Are Available in the HS Series?

The HS Series catalogue lists seven frame sizes: 71, 90L, 100L, 112M, 132S, 132M, and 160M.

The mounting dimension table includes A, AC, B, H, HC, L, and K measurements. For example, the 71 frame has an A dimension of 112 mm and an L dimension of 217 mm. The 100L frame has an A dimension of 160 mm and an L dimension of 315 mm. The 160M frame is listed with an A dimension of 254 mm and an L dimension of 498 mm.

These measurements help engineers assess the motor's installation envelope during equipment design. However, a similar frame size does not automatically mean that two motors have compatible pump interfaces.

3. Which Dimensions Should Be Checked Before Selecting a Hollow Shaft Motor?
3.1 Verify the flange dimensions

The flange is a key mechanical interface between the motor and pump. The HS Series catalogue provides three flange dimensions: M, N, and S. Their combinations vary according to frame size.

Before selecting a motor, compare these dimensions with the pump's mounting drawing. Check the interface configuration rather than relying on the frame designation alone.

3.2 Check the mounting space

Frame dimensions affect both motor mounting and the internal layout of the equipment. Engineers should compare the A, AC, B, H, HC, and L measurements with the available space around the pump, housing, and mounting structure.

For example, the 112M, 132S, and 132M frames have different dimensional configurations. Frame height alone is not sufficient to establish installation compatibility.

3.3 Match electrical specifications with pump requirements

After checking the mechanical interface, review rated power, speed, voltage, and current. The HS Series catalogue provides single-phase motor data for 50Hz, including 2-pole and 4-pole models.

The final motor selection should be based on pump load, power supply conditions, and the equipment's operating requirements.

4. Where Is the HS Series Used?

The HS Series asynchronous hollow shaft motor is designed for pressure cleaners and washing plants. Its direct coupling arrangement is suitable for equipment layouts where the motor and high-pressure pump are installed as an integrated drive assembly.

For OEM manufacturers, reviewing frame sizes and flange dimensions during the design stage helps clarify mounting requirements and plan the motor-pump layout.

5. Motor Selection Checklist

Before confirming an HS Series model, review the following:

  • Required pump power and operating speed.

  • Rated motor voltage, frequency, and current.

  • Motor frame size and available installation space.

  • Flange dimensions M, N, and S against the pump interface.

  • Actual operating conditions and environmental requirements.

The HS Series catalogue specifies an ambient temperature range of -15°C to +40°C, an altitude limit of 1,000 metres, Class F insulation, and rated voltage tolerance of ±5%.

Conclusion: Selecting a hollow shaft motor for pressure cleaning equipment requires more than checking rated power or frame designation. Evaluating flange dimensions, mounting space, electrical specifications, and pump interfaces together provides a more reliable basis for motor selection.